毒龙钻是什么

Hello! Welcome to Jiangsu Runtian Xincheng Intelligent Technology Co., Ltd!

18912476492

LOCATION:Home>>news>>Industry Dynamic>>Discuss the key processing technology of die - cutting machi

Contact Us

C

Jiangsu Runtian Xincheng Intelligent Technology Co., Ltd

Tell :0510-88991997

Fax :0510-88991997

Phone:18912476492

E-mail:rtxcsales@rtxcnu.com

Url      :www.rtxcnu.com

Zip Code:214000

Address:No. 81, Jinma Road, Hongshan Street, Xinwu District, Wuxi City


Industry Dynamic
分享至:

Discuss the key processing technology of die - cutting machi

DateTime:2019/12/03

Die - cutting machine alias cutting machine and CNC punch. It the key to some non-metallic materials, stickers, EVA, double-sided tape, electronic products, mobile phone pad (all broken, a broken), such as die-cutting, indentation and actual operation of hot stamping laminating, automatic waste drainage, die cutting machine application steel knife, metal mold, steel wire (or engraved steel template), according to the steel plate to release some pressure will print or cardboard cut in some way.


It is the key equipment of post-press packaging processing. Die - cutting process is the general application of packaging printed matter process. It is based on the design of the product will die - cutting knife composed of die - cutting board. The process of forming printed matter or other annulus hairs into the desired shape or shape of the wound under pressure. The indentation process USES a crimping knife or socket mold to line the sheet according to the pressure effect, or bends and produces the sheet according to the application of the secret medicine at the reserved site.


In general, die - cutting indentation is to die - cutting and socket knife in the same template, and in the die - cutting machine in addition to die - cutting and indentation solution process, this is very simple. It's called die cutting. The key process of process die-cutting indentation is: the bottom plate → pressure adjustment → clear standards → adhesive substrate auxiliary materials → detection die-cutting → formal die-cutting indentation → detach from the finished wire rewinding machine or cutting a piece → bulk.


Die - cutting machine to clear common faults


1, mechanical failure: automatic plane die-cutting machine often has the migration of the platform, mainly foreign matter fell into the die-cutting part. In general, report the position of the wedge below the moving shaft first, and rotate the moving platform to the limit point. The monitor moves the relative position between the platform and the upper static platform to ensure equal space between the four corners of the platform and the middle of the upper static platform (the area where the die cutting machine is clamped).


2, electrical fault: because the operation of the automatic die-cutting machine is controlled by PLC, the key detection point, electrical switch and output posture are controlled by PLC, its internal process flow for ladder logic diagram, so when there is an electrical fault, maintenance personnel to understand the ladder logic diagram, then find out the cause of the fault is very simple.

contact us

Tell :0510-88991997

Fax :0510-88991997

Phone:18912476492

Phone:18661000660

E-mail:rtxcsales@rtxcnu.com

Url      :www.rtxcnu.com

Zip Code:214000

Address:No. 81, Jinma Road, Hongshan Street, Xinwu District, Wuxi City

Copyright (c) Jiangsu Runtian Xincheng Intelligent Technology Co., Ltd All rights reserved 蘇ICP備2020051884號-2
网站地图